（圖）耐高溫(阻燃)電力電纜-中盛耐高溫電力電纜FF22耐高溫(阻燃)電力電纜 High Temperature Resistant (Flame Retardant) Power Cable 本產品適用于額定電壓0.6/1kV及以下的高溫范圍和惡劣 環境內，作電氣設備電能傳輸線。 It is used as power transmission cable for electric equipments of rated voltage 0.6/1kV or lower in bad environment or that with high temperature. 一、生產執行標準 采用企業標準Executive standard: enterprise standard 二、使用特性 Performance in Usage 1、額定電壓UO/U: 0.6/1kV。 2、電纜允許{zg}工作溫度: 氟塑料絕緣及護套為200℃； 氟塑料絕緣耐熱105聚氯乙烯護套為105℃；氟塑料絕緣硅橡 膠護套為180℃。 3、短路時(最長持續間不超過5S)電纜導體的{zg}溫度不 超過250℃。 4、電纜敷設溫度應不低于-15℃。 5、電纜的彎曲半徑如下：單芯電纜：其彎曲半徑不小于 電纜外徑的20D。 三芯電纜:其彎曲半徑不小于電纜外徑的15D。 6、氟塑料絕緣及護套型電力電纜具有優異的耐化學腐蝕 性、耐高溫及阻燃性。 1: Rated voltage UO/U: 0.6/1kV 2: Max.working temperature allowed by cable is 200℃ for cable with fluoroplastic insulation and sheath, 105℃ for cable with fluoroplastic insulation，105℃ heat resistanc and PVC sheath, and 180℃ for cable with fl uoroplastic insulation and silicon rubber sheath. 3: Max temperature of cable conductor is no more than 250℃ during short circuit (The longest lasting time is no more than 5s). 4: Temperature for installation is no less than -15℃. 5: Bending radius of cable as follows: It is no less than 20 times that of cable outer diameter for cable with single core It is no less than 15 times that of cable outer diameter for cable with 3 cores 6: Power cable with fluoroplastic insulation and sheath has good features of chemical corrosion resistance, high temperature resistance and fl ame retardance.