主要用途： Usage： 用于軟管包裝行業對全塑軟管進行擠出成形 It’s used for extruding soft tubes. Features： 五層管組成由外層、內層、兩個粘合層，另有阻隔層。其有極好的氣體阻隔性能，能有效防止氧氣和異味氣體的滲入，同時防止內物香味及有效成份的滲出。 5-layers tubes is made up of outer layer, inner layer, 2 sticking layers and a shielding layer; it has perfect insulation to air, and can prevent oxygen and different smell penetrating into the tube, as well as preventing in-tube content and adore leakage. 2．即使模頭外形結構復雜、體形大，但操作無異于單層機，擠出時層與層之間分部均勻并塑化性好。 2．Though it has large size and complex structure, the operation is same as single layer extruder; each layer is placed evening with good plasticity. 3．每層由各自螺桿獨立完成 3. Each layer is made by separate screw. 4．操作電路系統、溫控系統由臺灣原廠的專業的工程師設計，加熱絲及螺桿電機由臺灣原裝進口，保證了機械的長時間地工作。 4．Electrical system and temperature controlling system is designed by professional Taiwanese engineer; Heating wires and screw motor is imported from Taiwan, to ensure long hours working of the machine. 技術參數： Technical parameters： 產品直徑：16~60 Tube diameter：16~60 生產速度：10米/分鐘 Capacity：10m/min 配套電機：外/內層電機為5.5KW; 粘合層/阻隔層電機3.7KW; 切臺電機：0.75KW 真空泵：1.5KW; 伺服電機：0.85KW 牽引臺電機：1.5KW Motors：outer/inner layer motor 5.5KW; sticking layer/shielding layer motor 3.7KW; cutting table motor：0.75KW; vacuum pump：1.5KW; servo motor：0.85KW drawing table motor：1.5KW 加熱總功率： 50KW Heating power： 50KW 工作水壓：1.5～2.5兆帕 Working water pressure：1.5～2.5MPa 五層軟管擠出機 上海博睦實業有限公司 021-56556997