空心圓錐噴嘴-斐卓Feizhuo

空心圓錐噴嘴結構新穎，噴霧結構為空心圓環(huán)狀，噴射角度為40-90°，它具有在不等的壓力下均能達到同等大小液滴的噴霧，因為該噴嘴為無芯結構，內腔通暢，所以噴嘴不易堵塞；該產品主要應用于氣體及空氣除飛塵和其他燃燒產物；產品的去污以及需冷卻的設備中。

連接螺紋             A          B              C               D            L   

1/8                   17.5      16.0          12.0         20.0      25.5

1/4                   22.5      19.0          13.5         23.0      32.0

3/8                   35.0      28.5          17.5         28.5      37.5

1/2                   35.0      28.5          21.5         36.0      49.5

3/4                   40.0      32.0          24.0         40.0      55.5

1/8                   22.5      16.0          12.0         20.0      30.5

3/8                   28.5      22.5          17.5         28.5      40.0

1/2                   35.0      28.5          21.5         36.0      49.5

3/4                   41.5      32.0          24.0         40.0      57.5

Hollow cone nozzle -  Feizhuo

Hollow cone nozzle structure is novel, the spray structure of the hollow circular ring, jet Angle of 40-90 °, can always be achieved under the pressure of it is in the range of the same size of droplet spray, because the nozzle is no core structure, the inner cavity flow, so the nozzle is not easy to jam;This product is mainly used in the gas and air in addition to the dust and other combustion product;Products of decontamination and cooling equipment.

Connection thread A B C D L

1/8 17.5 16.0 12.0 20.0 16.0

A quarter of 22.5 19.0 13.5 23.0 19.0

3/8 35.0 28.5 17.5 28.5 28.5

1/2 35.0 28.5 21.5 36.0 28.5

Three quarters of 40.0 32.0 24.0 40.0 32.0

1/8 22.5 16.0 12.0 20.0 16.0

3/8 28.5 22.5 17.5 28.5 22.5

1/2 35.0 28.5 21.5 36.0 28.5

Three quarters of 41.5 32.0 24.0 40.0 32.0

快速鏈接式實心錐形噴嘴QH系列；

QH系列噴嘴產生一個實心的錐形噴嘴類型，并根據噴頭流量和壓力伴有43°-90°的噴霧角度。QH系列噴嘴以不可更換的葉片為特征，該葉片有助于沖擊區(qū)域橫斷面上的均勻分布。噴霧噴頭可迅捷而方便的安裝進主體或卸除之。

QH-W系列噴嘴產生一個實心的錐形噴嘴類型，根據噴頭流量和壓力伴有102°-120°的噴霧角度。QH-W系列噴嘴以不可更換的葉片為特征，該葉片有助于沖擊區(qū)域橫斷面上的均勻分布。噴霧噴頭很容易安進主體或自其上卸掉，既快而又省力。

Quick links solid cone nozzle QH series;

QH series nozzle to produce a solid cone nozzle type, and according to the nozzle flow rate and pressure of spray Angle with 43 ° to 90 °.QH series nozzle is characterized by an replacement blades, the blade will help uniform distribution on the transverse impact area.Spray nozzle can be quick and easy installation into the body or unloading.

QH - W series of nozzle to produce a solid cone nozzle type, according to the nozzle flow rate and pressure of spray Angle with 102 ° to 120 °.